Experience the perfect combination of Italian design and sustainability with our solar-powered V2 MOOV 500 automatic swing gate opener for single swing gate. Our gate opener offers reliable performance, ease of use, and energy efficiency. With our premium swing gate opener, you can enjoy convenient and secure access to your property while reducing your carbon footprint. Trust Skyline Gate for top-quality Automatic Gate & Door Solutions, providing Italian Gate Motors and Access Control Devices tailored for electric gates and garage doors. Enhance your property's security and convenience with our innovative and environmentally-friendly gate opening solution.

Strength:

• 80% Duty Cycle

• Linear Type or Telescopic Type Swing Gate Opener with smart Digital Control Board

• Obstacle detection

• Smooth and quiet linear travel

• Robust metal gear box

• Programmable acceleration and deceleration

• Self-learning of opening and closing times

• Auto-Close feature

• It can handle up to 300 Kg and 5m wide single swing gate.

• One of the best Italian V2 Automatic Gate Opener for Single Swing Gate

Note:

External Stopper Is Mandatory For Extended Position of Piston Arm But No Stopper Required For Fully Retracted Position.

Installation Information:

• For Swing-In Gates, the piston arms should be fully retracted when gates are fully open so gates can't open any further and that's how you set the gates' open position. However for gates' closed position, the gates should be closed against the external stopper so that the control board cuts off the motor's power due to current sensing. In this closed position, the piston arms will be in extended position but make sure that the arms are not fully extended and external stopper stop the gates before the pistons are completely extended.

• For Swing-Out Gates, the piston arms should be fully retracted for gates' closed position and the use of external stopper is optional. However for gates open position, the gates should be opened against the external stoppers so that the control board cuts off the motors' power due to current sensing. In this open position, the piston arms will be in extended position but make sure that the arms are not fully extended and external stoppers stop the gates before the pistons are completely extended.