Yellow Safety Bollard 89mm x 900mm – Surface Mount
Protect valuable gate equipment and property infrastructure with our 89 mm × 900 mm yellow surface-mount safety bollard.
Designed for commercial, industrial and residential applications, this highly visible bollard provides a practical barrier around automatic gate motors, boom gate equipment, control cabinets, meters and other vulnerable infrastructure.
The bright yellow powder-coated finish makes the bollard easy to see, while the 50 mm red reflective tape provides additional visibility in low-light conditions.
Protect Automatic Gate Equipment:
Automatic gate motors and control equipment are often installed close to vehicle driveways and access lanes.
A small accidental impact from a vehicle can cause significant damage to:
- Sliding gate motors
- Boom gate operators
- Control boxes
- Access control equipment
- Electrical cabinets
- Gas meters
- Water meters
- Other property infrastructure
Installing a safety bollard can create a clearly visible physical barrier between vehicles and vulnerable equipment.
Surface Mount Installation:
This model uses a 225 mm diameter × 8 mm thick round base plate with four 16 mm mounting holes.
The surface-mounted design makes it suitable for installation onto suitable existing concrete surfaces where an in-ground bollard isn't practical.
Fixings/anchors should be selected according to the substrate and installation requirements.
High-Visibility Yellow Finish:
The bollard is powder coated yellow for high visibility and a professional commercial appearance.
A 50 mm red reflective strip around the upper section provides additional visibility, particularly around vehicle entrances, warehouses and car parks.
Specifications:
Product type: Surface-mount safety bollard
Diameter: 89 mm
Height: 900 mm
Wall thickness: 2 mm
Base plate: Round 225 × 8 mm
Mounting holes: 4 x 16 mm
Finish: Yellow powder-coated
Top cap: Plastic
Reflective tape: 50 mm red
Installation: Surface mount
Ideal Applications:
The bollard is suitable for:
- Automatic gate motors
- Electric gate equipment
- Boom gates
- Commercial properties
- Industrial facilities
- Warehouses
- Car parks
- Gas meters
- Water meters
- Electrical cabinets
- Driveways
- Loading areas
Important Installation Note:
This is a surface-mounted protective bollard, so the quality and suitability of the concrete substrate and fixing method are important.
For vehicle-impact protection, installation should be appropriate for the expected site conditions and level of risk.
